Computer or laptop storage memory failure has early signs that are very important. This article discusses the five most important signs of SSD and HDD memory failure.
Just like all electronic devices, personal computers can fail. Replacing a damaged part can be a simple task, but changing a damaged HDD or SDD leads to losing all data stored in it. New PCs that rely on solid-state storage are better since SSDs are more durable than HDDs. The SSDs are devoid of any moving parts and can be more resistant to shock and vibration, but that is not to say that they are not damaged. SSDs can also be damaged, and you should not completely ignore this. Here, we will discuss five storage memory signs that you should watch out for to maintain your system in the best condition. These signs can be specific sounds that can give you the alerts you need to back up your data.
Hearing Abnormal Sounds
Modern storage drives, especially hard disk drives (HDDs), are produced with great power and capability. With large disks spinning at thousands of rounds per minute and arms moving back and forth in milliseconds, today’s HDD design is almost silent. You may hear poor rotation and clicking when working on the hard disk; if the sounds are louder than usual, it might be a warning sign. Of course, it is impossible to be sure of HDD failure just with abnormal sound; the hard drive may be old and cause extra noises. Also, if you hear loud metal noise, the drive may be damaged from the inside.
You should not ignore these signs. The hard drive may be working fine, but its complete failure takes time. You should have a backup of your important data stored on the drive and replace it with a new one. Optical storage drives such as DVD-ROMs or Blu-ray Disc drives make more noise when working than hard disks. When turning the disc, you must hear a sound that includes the engine’s movement and the resulting air rotation; but since these are produced with a lower tolerance threshold compared to hard drives, they will wear out faster.
Fortunately, due to the ability to transfer data from storage memory, we can say that hard disk noise cannot cause data loss. According to the information, if you continue to use the hard disk with the mentioned conditions and the noise it has, it will be damaged in such a way that you won’t be able to recover your data. If the optical storage drive, like the HDD, starts to make a loud or strange noise, you should not ignore it, and you need to take useful steps to replace it as soon as possible. Of course, not all storage systems include mechanical and moving parts. Systems that use flash memory such as SD cards, USB sticks, and solid-state drives (SSDs) are just collections of circuit board chips; hence, they shouldn’t have any noise.
If your old SSD is making noise, another part of the computer may be in trouble. It will help if you aren’t indifferent to the sound you hear from every storage drive you have on your computer. The sound they hear may be due to fan or power activity; otherwise, you should not neglect to solve this problem. Backing up all system information is the best step you can take to continue replacing your drive.
Sudden Disappearance of Information
Another sign of storage memory failure is the loss of one or more files. Information is not stored as a continuous stream; instead, it is placed in a set of small blocks. It is possible that the blocks are physically present next to each other or sparsely in the drive environment. The only reason to destroy a few bits is to damage one of the blocks, and if you try to recover the files, the operating system will try to find all the blocks that make up the file. Without a complete data set, the file is incomplete, and the operating system may report a crash or report an inability to find the files. The NAND flash will be physically destroyed whenever a block of data is written or erased, and after various write and erase cycles, the block will no longer function properly.
SSD manufacturers use many tricks to reduce the problem, but they are different in terms of performance. USB storages usually have a shorter lifespan than SSDs and fail without warning. If a drive starts to lose data, you need to replace it as soon as possible. Do not forget to back up before it’s too late.
Note: You should never use flash memory to back up important data. For backup, it is best to go for HDDs and cloud storage.
Slower Execution of Commands and Programs
Observing a slight malfunction of the hard disk cannot be a sign of failure, but a change in the device’s overall performance can be a sign of a problem in your storage drive. Computer hardware such as RAM, GPU, and CPU will not slow down over time; but from a software point of view, overloading programs in the background and crowded the operating system after years of updating can cause some changes.
If your computer does not slow down after a long time or spends a lot of time running or accessing files, something needs to be addressed. Hard disks fail, and there is also a possibility of SSD failure. Hard disk failure signs are displayed in different ways. Bad block errors are displayed on both types of storage drives, and this is usually when an unusual time is required to read or write a file, and the process eventually fails.
As mentioned earlier, this problem can be caused by a software error. An operating system update may cause an error, resulting in the CPU running in the background; however, if you have not recently updated and protected your computer well, unexpected changes may indicate a malfunction of the device’s primary storage memory. Checking this is not an easy task, and it is not recommended to replace the HDD or SDD just because the device is slow. However, if the drive is removable (such as a flash drive), rapid speed reduction can be a good sign of poor storage memory.
Boot Drive Error
Most users are familiar with this issue, and it can be described as something normal for a personal computer. One day you use the system well, and the next day, you suddenly get the horrible message “insert Boot Disk and Press any Key.”
Instead of looking at the operating system’s logo, a dark sentence will suddenly catch your eye. There may be other explanations for this. For example, this message can be displayed when a new BIOS is installed; But if no changes or upgrades have been made, you may be experiencing storage crashes. At the very least, this can be considered a sign of failure. You can recover your data, but it is better to spend your time backing up and buying a new storage memory. You may see your PC crash accidentally before booting is complete; this sign can indicate serious problems.
If the error is due to a part of the drive data, we recommend removing the storage and installing it as secondary storage on another device. If the device can test the storage memory or read its contents well, the drive may be suitable for reuse. Device boot information may also be affected by malware; In this case, placing storage memory on another device can also challenge its health.
We can claim that scanning the HDD or SDD on another computer for errors will only be done if you are sure that the second device is not infected or at risk. We recommend that you check the health status and the absence of any malware on your hard drive before doing so. The unexplained loss of a boot drive can be frustrating and not a rare problem. It is best to take precautionary measures; in fact, you should have the operating system on one drive and save all your files in another partition separately. Of course, you can back up your files.
The last sign of a hard drive or computer storage memory failure may not be a substantial cause. In other words, if you see the error, you must first check all issues related to raise the possibility of hard drive failure finally. In the Windows operating system, the blue screen of death (BSOD) will be displayed when the device cannot continue working.
The latest version of Windows tries to make your work a little easier by displaying a QR code that is scannable with a smartphone. A web page is then loaded that provides tips on the problem’s source and how to solve it. Most recommendations include making software changes such as uninstalling new programs or drivers; because they can be considered the most important reasons for BSOD display. None of the methods can solve the problem if the main reason for displaying this page is a hard drive or storage memory failure. Just like missing boot drives, analyzing system crashes can be difficult. This error could indicate a problem in storage, but it is also possible to see it due to some other system issues.
Modern computers are amazingly engineered and surprisingly complex, and interestingly, they can run smoothly in the long run. Of course, this smooth path also has an end; all storage memories have a limited lifespan. We hope you see the signs we mentioned before a complete HDD or SDD failure so that you can back all your valuable data. Being prepared at all times can reduce potential damage. Our goal is to show you the concept of backup at all times so that you can protect your sensitive information well. As said earlier, it is possible to move your files and replace storage drives, but you can’t be sure about retaining your valuable information if you fail to act in time.